Commit Graph

613 Commits

Author SHA1 Message Date
Roberto E. Vargas Caballero da78629cf5 Add 8 bit version of HTS
HTS version for 7 bits environments already was implemented in st.
This patch adds the 8 bit version of it.
2014-07-08 23:32:28 +02:00
Roberto E. Vargas Caballero f5356d0185 Add 8 bit version of NEL
NEL version for 7 bits environments already was implemented in st.
This patch adds the 8 bit version of it.
2014-07-08 23:32:25 +02:00
Roberto E. Vargas Caballero bcbaf5d9be Add 8 bit version of DECID
DECID version for 7 bits environments already was implemented in st.
This patch adds the 8 bit version of it.
2014-07-08 23:28:10 +02:00
Anders Eurenius f796533b1b Render faint attribute
Faint text is implemented by allocating a new color at one-half
intensity of each of the r, g, b components, or if the text bold at the
same time, it is not made lighter.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2014-07-08 22:46:55 +02:00
Ivan Delalande 955923b38b Remove all strcmp and strlen calls on Glyph.c[]
There were a few occurrences of strcmp and strlen being called on Glyph.c[],
which is not always null-terminated (this actually depends on the last values in
the buffer s in ttyread()). This patch replace all the calls to strcmp with a
test on c[0] directly or a call to tlinelen, and the one to strlen with utf8len.
I also took the opportunity to refactor getsel and tdumpline.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-07-08 09:21:48 +02:00
Anders Eurenius 1fc4afd1e6 Render struck-out attribute
Implement crossed-out text with an XftDrawRect call, similar to how
underline is implemented. The line is drawn at 2/3 of the font ascent,
which seems to work nicely in practice.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-06-27 14:07:22 +02:00
Anders Eurenius 21bd4f4f9d Render invisible attribute
Implement invisible mode by setting the foreground color to be the same
as the background color. Not rendering anything would also be an
alternative, but this seems less likely to cause surprises in
conjunction with any hacks.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-06-27 14:06:21 +02:00
Anders Eurenius 50e6355e0d Reorder and extend glyph attributes
Faint, invisible, struck and fast blink are added as glyph attributes.
Since there's an edit here, let's take the opportunity to reorder them
so that they correspond to the two's power of the corresponding escape
code. (just for neatness, let's hope that property never gets used for
anything.)

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-06-27 14:04:47 +02:00
Roberto E. Vargas Caballero 77569526c0 Remove CEIL macro
This macro was not correct in some cases, and it was used only in
one place, where we did'nt get any benefit in performance of in size,
so the macro is removed and ceilf is used instead of it. The only
function needed from math.h is ceilf, so this patch defines the
prototype of it instead of including math.h.
2014-06-26 12:37:06 +02:00
Ivan Delalande 19d095717f Fixed wrong nanosecond factor 10E6.
Commit 5edeec1 introduced a wrong factor for nanosecond computation, the correct
value is 1E6. Time and timeout values are 10 times less than they should be and
this cause high CPU usage.

Reported by pyroh on IRC. Thanks!

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-06-26 12:33:55 +02:00
FRIGN 5edeec1b20 Use monotonic clock to prevent timing issues
This patch replaces the gettimeofday()/timeval-system with
uses of clock_gettime() with a monolithic clock and timespec-structs.
gettimeofday() is not accurate and prone to jumps and POSIX.1-2008
marks it as obsolete. Read more here [0].

The patch should speak for itself and decreases the binary
size for me by almost 200K(!).

[0]: http://blog.habets.pp.se/2010/09/gettimeofday-should-never-be-used-to-measure-time

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-06-24 21:45:36 +02:00
Troy Sankey 58eaa998b3 update size hints on zoom
On font zooming (i.e. xzoom()), window size hints are not updated.  This
patch does that.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-06-21 10:03:41 +02:00
Silvan Jegen c2fd2754eb Refactor the innermost loop of the xdraws function
Signed-off-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2014-06-15 12:12:23 +02:00
Christoph Lohmann 587b443592 Style police. 2014-06-07 13:49:04 +02:00
Roberto E. Vargas Caballero 93661042a2 Simplify tdeftrans 2014-06-07 13:23:45 +02:00
FRIGN 18a05fdf43 Remove unnecessary typedef
This should also fix compiling-errors on OpenBSD,
as reported by Nils R. Thanks!

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-06-06 15:23:22 +02:00
Colona 5159d55c63 Refactor selsnap SNAP_WORD.
Refactor the SNAP_WORD part in selsnap, and fix a bug that caused the word
delimiters to be ignored if it was at the very beginning or end of a wrapped
line.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-06-05 21:14:45 +02:00
Colona 6fd887077e Fix rectangular selection.
selsort computes the wrong normalized coordinates when rectangular
selection is enabled, causing rectangular selection to only work
when going toward either the top left corner, or the bottom right
one.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-06-04 21:10:25 +02:00
Hiltjo Posthuma bb6dc33206 tiny cleanup
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-06-04 21:09:07 +02:00
Colona 2323e962e6 Make selection consistent over line breaks.
Currently, selection is expanded to the end of the line over line breaks only in
regular selection mode, when the line in not empty and when going down and/or
right. This covers all the cases including word selection mode, with the
exception of rectangular selection because it would make this mode too rigid.
This adjustment is made in selsort so I renamed it to selnormalize to better
reflect what it does now.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-06-04 21:09:07 +02:00
Christoph Lohmann c6fcb78b3a Fixing color and refactor xsetcolorname.
By  the recommendation of FRIGN I refactored xsetcolorname to remove the
unnecessary r, g, b variables when allocating a new  color.  Colors  are
now freed and set to the new color. A die() should not happen here. Oth‐
erwise it is easy for applications to kill st. St should be resilent  to
malicious input.

Second  this  patch  standardises  the  naming  of  »color«. There is no
»colour« here. Maybe in some parts of the world.
2014-06-01 17:08:16 +02:00
Christoph Lohmann 8b4cfcea73 Revert "Refactor xsetcolorname()"
This reverts commit a32c5f5726.
2014-06-01 16:52:19 +02:00
FRIGN a32c5f5726 Refactor xsetcolorname()
I mainly improved the slightly off algorithm used to load colours in the 256-colour-space and
removed unnecessary local values (r,g,b,colour).
"colour" is not necessary as a punchbag for XftColorAlloc[Value,Name], as they don't mess with
the result-adress until they are absolutely sure everything worked out[0].

Being at it, I changed the error-returns for AllocValue to dies (just like in xloadcols()), as
a failure is most likely an OOM-situation you better catch early.
In case of an invalid name everything stays the same.

[0]: http://www.opensource.apple.com/source/X11libs/X11libs-40/libXft/libXft-2.1.13/src/xftcolor.c

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2014-06-01 16:20:22 +02:00
Balazs Kezes ba36d1394b Don't report release events for mouse wheel
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2014-06-01 15:57:03 +02:00
Christoph Lohmann ede83bd08b Fixing italic bold.
Thanks Felipe Spychalski <spychalski@gmail.com> for the patch!
2014-06-01 15:54:28 +02:00
Alexander 2411308bd2 Fixed copying empty lines inside selection.
The code was assuming that empty lines have implicit wrap-around attribute.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-05-27 08:37:12 +02:00
Christoph Lohmann f4ebb3180f Fixing trailing whitespaces. 2014-05-24 13:48:44 +02:00
FRIGN 3544e354b2 Fix colour-model and simplify xloadcols()
Signed-off-by: Christoph Lohmann <20h@r-36.net>
2014-05-24 13:47:00 +02:00
Hiltjo Posthuma cf890e5bf0 Allow mouse selection override using ShiftMask
Similar to xterm or urxvt holding shift before selecting text with the mouse
allows to override copying text. For example in tmux with "mode-mouse on" or
vim (compiled with --with-x), mc, htop, etc.

forceselmod in config.h sets the modifier to use this mode, by default
ShiftMask.

Signed-off-by: Hiltjo Posthuma <hiltjo@codemadness.org>
2014-05-14 07:48:25 +02:00
Christoph Lohmann bdb850a16a Redraw needs all dirty lines to have flash etc. work. 2014-05-09 17:12:58 +02:00
Colona e31829f659 End a sequence only on CAN, SUB, \a and C1s. 2014-05-09 10:25:29 +02:00
Colona 5e917ab287 Also clears ESC_START on interrupt characters during sequences.
Otherwise, the rest of the input is interpreted as a new escape
sequence.
For the ESC character, ESC_START is re-set in tcontrolcode.
2014-05-09 08:26:37 +02:00
noname 99fb365aa3 Consistent FALLTHROUGH comments. 2014-05-02 21:49:52 +02:00
Roberto E. Vargas Caballero 870f961c49 Fix displaying control code
Control code are never displayed. It is not important if graphic
charset is displayed or not.
2014-04-30 08:35:53 +02:00
Roberto E. Vargas Caballero 1629363f2d Remove ATTR_GFX and tselcs
ATTR_GFX was used long time ago to detect when terminal was in
graphic mode. Today graphic mode is implemented using a charset
pointer, so ATTR_GFX is not needed anymore because graphic
condition can be detected directly checking if current charset
is GRAPHICS C0.
2014-04-29 15:17:51 +02:00
noname 6b315558f8 Do not save cursor in tresize.
This patch fixes the bug introduced in
8f11e1cd03

To reproduce the bug:
1. Save cursor: printf '\e[s'
2. Load cursor: printf '\e[u'
3. Resize st window.
4. Load cursor again: printf '\e[u'
2014-04-29 15:17:50 +02:00
noname 5f91983541 Simplify selected(). 2014-04-28 18:49:45 +02:00
noname 0e439e5624 Simplify xunloadfonts. 2014-04-28 18:48:09 +02:00
noname 74962bf566 Remove one indentation level in getsel(). 2014-04-28 18:38:07 +02:00
noname 6681af165b Remove unused dump() function. 2014-04-28 18:38:07 +02:00
noname 1ae2745fd1 Add missing function prototypes. 2014-04-28 18:38:06 +02:00
noname a48f2be7f5 Use MODBIT in xseturgency. 2014-04-28 18:38:06 +02:00
noname 17fa1493ee Compute ena_sel as one expression. 2014-04-28 18:38:06 +02:00
Roberto E. Vargas Caballero a8a9e66a7d Simplify expressions in tputc() 2014-04-28 18:38:05 +02:00
Roberto E. Vargas Caballero 17290f493b Fix misplaced break
This misplaced break was causing an incorrect fall through
from DSR to DECSTBM.
2014-04-28 18:38:05 +02:00
Roberto E. Vargas Caballero 43d74ef362 Create a function for DEC test
Almost of the sequences execute their action in a separate function,
which is good because helps to read the full set of sequences
faster.
2014-04-28 18:38:05 +02:00
Roberto E. Vargas Caballero 3764f38fc8 Fix tputc control code handling
The patch 53105cf modified how control codes were detected, because
it tried to handle also C1 control codes (0x80-0x9f), that have
upper bit to 1, so they are multi byte character in utf8.
Code was checking the value of width in order to known that after
decoding the unicode point had a width of 1 byte, but it as incorrect
because this width is the columnb width.
2014-04-28 18:32:09 +02:00
Roberto E. Vargas Caballero 53105cf74f Remove repeated initialisation of term.esc
Once a sequence is completed term.esc must return to 0, so
instead of repeating this expression in all the cases is
better put it at the end of the block.
2014-04-27 11:30:21 +02:00
Roberto E. Vargas Caballero aa35bbd7a1 Cancel DCS with SUB, CAN, ESC or any CC1 code
From http://www.vt100.net/docs/vt510-rm/chapter4:

	*The VT510 ignores all following characters until it receives a
	 SUB, ST, or any other C1 control character.

So OSC, PM and APC sequence ends with a SUB (it cancels the sequence
and show a question mark as error), ST or any another C1 (8 bits)
code, or their C0 (7 bits) equivalent sequences (at this moment we
do not handle C1 codes, but we should). But it is also said that:

	Cancel  CAN
	1/8     Immediately cancels an escape sequence, control sequence,
		or device control string in progress. In this case, the
		VT510 does not display any error character.

	Escape  ESC
	1/11    Introduces an escape sequence. ESC also cancels any escape
		sequence, control sequence, or device control string in
		progress.
2014-04-27 11:30:13 +02:00
Markus Teich 704d12442e add break;s for last cases in switch statements 2014-04-27 10:34:57 +02:00
noname 02d2df5790 Do not eat ESC character if control string is not properly terminated.
Currently tputc handles the case of too long control string waiting for
the end of control string.

Another case is when there is ESC character is encountered but is not
followed by '\\'.  In this case st stops processing control string,
but ESC character is ignored.

After this patch st processes ESC characters in control strings properly.

Test case:
printf '\e]0;abc\e[1mBOLD\e[0m'

Also ^[\ is actually processed in the code that handles ST.
According to ECMA-048 ST stands for STRING TERMINATOR and is used to
close control strings.
2014-04-26 00:14:42 +02:00
noname c4b79b055d Fix for multibyte characters in techo.
Works for both signed and unsigned char.
2014-04-26 00:03:09 +02:00
noname 7f1e02e4db s/DSC/DCS/ DCS stands for DEVICE CONTROL STRING 2014-04-26 00:03:09 +02:00
noname 84f6dbffa5 Use xwrite instead of write. 2014-04-26 00:03:08 +02:00
noname 2d67f99d28 Remove unnecessary break 2014-04-26 00:03:08 +02:00
noname 4a8574b439 Comment fix. 2014-04-25 23:57:44 +02:00
Colona 8f11e1cd03 On terminal resize, clear the alt screen with its own cursor.
Currently the alternate screen get messed up on resize if it has
different colors or mode.
2014-04-25 23:57:44 +02:00
noname 844c503c80 Optimize tputtab.
Before this patch executing
	printf '\e[10000000000I'
or
	printf '\e[10000000000Z'
resulted in long delay.
2014-04-25 23:57:44 +02:00
noname 1b0b9759dc Use != instead of ^ for logical values.
sel.alt is only changed by
	sel.alt = IS_SET(MODE_ALTSCREEN);
2014-04-25 23:57:43 +02:00
noname 99d2d6007a Use BETWEEN macro in xsetcolorname and fix style. 2014-04-25 23:57:43 +02:00
Christoph Lohmann fe31a3f634 Conformity in the -g geometry handling.
Thanks to Yuri Karaban for suggesting this!

These changes make -g correspond to <cols>x<rows> and honor it so non-tiling
window managers can work with the size hints afterwards. It also adds a -i
flag to force the window size. This is needed so -g keeps being useful in dwm.
2014-04-25 22:34:24 +02:00
Roberto E. Vargas Caballero 6b7f63bac5 Simplify a bit more tdeletechar and tinsertblank
The large and repeated expression used in memmove to indirect
the line can be simplified using a pointer, that makes more
clear where begins and where ends the movement.
2014-04-25 17:25:59 +02:00
noname 80b32af794 Simplify tdeletechar and tinsertblank and fix memory corruption.
Current CSI parsing code uses strtol to parse arguments and allows them
to be negative. Negative argument is not properly handled in tdeletechar
and tinsertblank and results in memory corruption in memmove.

Reproduce with printf '\e[-500@'

Patch also removes special handling for corner case and simplifies
the code.

Removed
	term.dirty[term.c.y] = 1
because tclearregion sets dirty flag.
2014-04-25 17:17:48 +02:00
noname 16ac85bf54 Style fixes in tscrollup. 2014-04-23 20:38:04 +02:00
noname fe527aa508 Do not set dirty flag twice in tscrollup and tscrolldown. 2014-04-23 20:37:59 +02:00
noname 3afdb4ff04 Use tsetdirt in tscrollup and tscrolldown.
tscrollup and tscrolldown do not use tsetdirt, but their code is
equivalent to

        tsetdirt(orig, term.bot-n);
        tsetdirt(orig+n, term.bot);

tclearregion also marks cleared lines as dirty.
In tscrolldown it sets lines from term.bot-n+1 to term.bot dirty, and in
tscrollup it sets lines from orig to orig+n-1 dirty.

In both functions all lines from orig to term.bot are effectively set
dirty, but in tscrolldown lines from orig+n to term.bot are set dirty
twice, and in tscrollup lines from orig to term.bot-n are set dirty
twice.

These patches make it clear which lines are set dirty and sets them
dirty once in each funciton.
2014-04-23 20:35:16 +02:00
noname f9dc374ea0 Fix techo handling of control and multibyte characters.
techo compares signed char to '\x20'. Any character with code less then
'\x20' is treated as control character.  This way characters with MSB
set to 1 are considered control characters too.

Also this patch makes techo display DEL character as ^?.

To reprocuce the bug, enable echo mode using printf '\e[12l',
then type DEL character or any non-ASCII character.
2014-04-23 20:31:45 +02:00
noname fa19f241a3 Make xrealloc and xstrdup style consistent. 2014-04-23 15:39:04 +02:00
noname df1810dd8f Use BETWEEN in tsetchar. 2014-04-23 15:39:03 +02:00
noname ed855ea432 Use uint and uchar instead of unsigned int and unsigned char. 2014-04-23 15:39:03 +02:00
noname 68d97457ec Remove argument names from function prototypes. 2014-04-23 15:39:03 +02:00
noname 49672dac7b Style fix in tdumpsel. 2014-04-23 15:39:02 +02:00
noname f21e47f44a Use BETWEEN in tinsertblankline and tdeleteline. 2014-04-23 15:39:02 +02:00
Christoph Lohmann 87abc7cd59 It's 2014 now. 2014-04-22 19:22:58 +02:00
noname@inventati.org 1388870331 move MODBIT to Macros section
Patch moves MODBIT to macros section and uses it in tselcs.
2014-04-20 21:13:37 +02:00
noname@inventati.org 6b56cbf9cc misplaced parenthesis in LEN macro 2014-04-20 21:07:04 +02:00
Markus Teich 3269bf213d remove confusing SERRNO macro
I found the SERRNO Macro slightly confusing, since you have to look
it up, if you don't know it already. A web search showed it does
not seem to be any kind of standard. Also there was no reason in
the commit log when it was introduced in 2009. As you can see it
also leads to new patches, which don't use this macro (probably the
author did not know about it).
2014-04-20 21:00:46 +02:00
noname@inventati.org 4ad2fc7f18 Simplify techo
Remove special case for \e because it is handled well by "control code"
case.
2014-04-15 08:16:39 +02:00
noname@inventati.org dc74c4f729 typedefs instead of #defines
Replaced #defines with typedefs where possible, patch attached.
2014-04-15 08:14:46 +02:00
q@c9x.me b8d6171cb0 fix cursor handling when alt screen is disabled
I don't like this alt screen thing, but when
allowaltscreen == 0, the cursor is still saved
and restored after calling 'less' (or 'man').

This patch makes allowaltscreen == 0 usable.
2014-04-15 08:13:41 +02:00
Roberto E. Vargas Caballero ebb6e03201 Merge remote-tracking branch 'origin/master' into omaster 2014-04-15 08:11:47 +02:00
Christoph Lohmann f27b44b7c2 Removing two unnecessary gettimeofday(). 2014-04-11 18:11:25 +02:00
Toaster Toaster 3cb80840db Increment XSync consistency
This patch cleans up a style inconsistency.
2014-04-11 16:29:13 +02:00
Christoph Lohmann a495fce128 There is no need for a full dirt redraw. 2014-04-05 20:34:57 +02:00
Christoph Lohmann 6f4cfa5136 Fixing a compiler warning with the assignment. 2014-04-02 09:26:28 +02:00
Rafa Garcia Gallego 672e4e4b03 Fix segfault when pressing PrintScr without a selection 2014-03-27 07:48:32 +01:00
Damian Okrasa 45b808b88e new utf decoder
This patch replaces current utf decoder with a new one, which is ~50
lines shorter and should be easier to understand. Parsing 5 and 6
sequences, if necessary, requires trivial modification of UTF_SIZ
constant and utfbyte, utfmask, utfmin, utfmax arrays.
2014-03-27 07:19:37 +01:00
Roberto E. Vargas Caballero 71328cbcdc Merge branch 'master' of ssh://suckless.org/gitrepos/st 2014-03-10 15:16:26 +01:00
Roberto E. Vargas Caballero 78f8843bc7 Add sequence for printing the current selection
This is very usefull in order to can select what is sent
to the plumber.
2014-03-06 07:55:07 +01:00
Roberto E. Vargas Caballero 96c230e476 Add key definition for printer sequences
These new combinations generate the same behaviour (basically) of
vt102. It is a good way of communicating st with other programs.

[0] http://www.vt100.net/docs/vt102-ug/chapter2.html
2014-03-06 07:53:15 +01:00
Roberto E. Vargas Caballero 6166a1afc8 Add MC for the full screen
This sequence is very useful because allows comunicate the content
of the terminal to another program.
2014-03-06 07:51:58 +01:00
Roberto E. Vargas Caballero cf332a325d Add MC for a single line
This sequence print the current line. It is different to the
'printer on' sequence, where all the characters that arrive to the
terminal are printer. Here only the ascii characters are printed.
2014-03-06 07:50:34 +01:00
Christoph Lohmann 1584956a60 Style cleanup.
Add some note about the main reason why st is still that big.
2014-03-01 11:04:03 +01:00
Christoph Lohmann d2ec39f0ef Style matters. 2014-03-01 09:22:57 +01:00
Roberto E. Vargas Caballero 1f0d981bd7 Add MC sequence
This sequence control when the printer is enabled or disabled. This
sequence control the behaviour of the -o option.
2014-02-22 11:54:30 +01:00
Roberto E. Vargas Caballero cdb3b1892a Add xstrdup function
Since we are using xmalloc, xrealloc ..., then it is not logical
call directly to strdup.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-02-08 19:58:37 +01:00
Roberto E. Vargas Caballero 315b7ee9ce Merge remote-tracking branch 'origin/master' 2014-02-04 11:46:45 +01:00
Christoph Lohmann c2026a4950 Removing the w3img support.
The patch to add w3img support destroys our way to handle fps and so stop
wasting resources on fast scrolling. Due to w3img being a hack to display
images in an ugly way, is there no need to support this. Use some real way to
display images.
2014-02-03 20:54:25 +01:00
Roberto E. Vargas Caballero 6521b5dc32 Remove non defined behaviour in selcopy
It is not defined when lateral effects of expressions are
calculated, so an expression as:

	--last >= gp && !(selected(last - gp, y)

is non portable.
2014-02-02 19:42:01 +01:00
Roberto E. Vargas Caballero a8d5870073 Remove duplicated code in strhandle
The error condition was duplicated in two different switches.
This new version centralized the error handling in only one place.
2014-02-02 19:42:01 +01:00