nixos-config/configuration.nix

# Edit this configuration file to define what should be installed on
#your system. Help is available in the configuration.nix(5) man page, on
# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).

{ config, lib, pkgs, ... }:

{
  nix.settings.experimental-features = [ "nix-command" "flakes" ];
  
  sops.age.keyFile = "/secrets/age/keys.txt";

  imports =
    [ # Include the results of the hardware scan.
      ./hardware-configuration.nix
      ./users/users.nix
      ./services/gitea.nix
      ./services/duckddns.nix
    ];
  
  # Use the systemd-boot EFI boot loader.
  boot.loader.systemd-boot.enable = true;
  boot.loader.efi.canTouchEfiVariables = true;

  # set hostname
  networking.hostName = "rackserver";

  # fix nixpkgs warning
  nix.nixPath = [
    "nixpkgs=${pkgs.path}"
  ];

  # ACME
  security.acme = {
    acceptTerms = true;
    defaults.email = "sky.hearn@pm.me";
  };

  # wireguard server setup
  # enable NAT
  networking.nat.enable = true;
  networking.nat.externalInterface = "eno4";
  networking.nat.internalInterfaces = [ "wg0" ];
  networking.firewall = {
    allowedUDPPorts = [ 51820 ];
  };

  networking.wireguard.interfaces = {
    # "wg0" is the network interface name. You can name the interface arbitrarily.
    wg0 = {
      # Determines the IP address and subnet of the server's end of the tunnel interface.
      ips = [ "10.100.0.1/22" ];

      # The port that WireGuard listens to. Must be accessible by the client.
      listenPort = 51820;

      # This allows the wireguard server to route your traffic to the internet and hence be like a VPN
      # For this to work you have to set the dnsserver IP of your router (or dnsserver of choice) in your clients
      postSetup = ''
        ${pkgs.iptables}/bin/iptables -t nat -A POSTROUTING -s 10.100.0.0/24 -o eno4 -j MASQUERADE
      '';

      # This undoes the above command
      postShutdown = ''
        ${pkgs.iptables}/bin/iptables -t nat -D POSTROUTING -s 10.100.0.0/24 -o eno4 -j MASQUERADE
      '';

      # Path to the private key file.
      #
      # Note: The private key can also be included inline via the privateKey option,
      # but this makes the private key world-readable; thus, using privateKeyFile is
      # recommended.
      privateKeyFile = "/run/keys/wg-privatekey"; # TODO: Change this to be a sops secret

      peers = [
        # List of allowed peers.
        { #nub
          # Public key of the peer (not a file path).
          publicKey = "j2WrE1lX5Pf12Yk61zzCUJCnzVQyR+s+nWw72a4gsik=";
          # List of IPs assigned to this peer within the tunnel subnet. Used to configure routing.
          allowedIPs = [ "10.100.1.0/24" ]; 
        } 
        { # ku
          publicKey = "MCPLxi1clVx92gfeq04mm1flgjzS2XqtC3OKN6C0iE8=";
          allowedIPs = [ "10.100.2.0/24" ]; 
        }
        { # Jas
          publicKey = "Q90Tvst8ZntJPl1WxLOcV108k9SwPIpjXAtxHPE62UM=";
          allowedIPs = ["10.100.0.6/32"];
        }
        { # skyLaptop
          publicKey = "2sg0sgMMGQrCGt0f/5+1kO/B0Ghfb137DTf9nYctZTM=";
          allowedIPs = [ "10.100.0.4/32" ]; 
        } 
        { # skyDesktop
          publicKey = "36tqEexZ8e6ks+qjDpnMzUY9LAJvFvVDe6MLzR9vtEo=";
          allowedIPs = [ "10.100.0.5/32" ];
        }
        { # melon :>
          publicKey = "nJgeRkHd6mRqT/lMUJIApCov4GgSekrkJJxZGTXOVCE=";
          allowedIPs = [ "10.100.0.7/32" ];
        }
        {
          publicKey = "gs17DdrtnYe2cA+Jxt6p/qovfCAT7eVn58Pq5eTHmGc=";
          allowedIPs = [ "10.100.0.8/32" ];
        }
        { # Kitibri
          publicKey = "cT95nYaPYkra1Im355EwUXxw9Wef7b1j0YBx6+rnp1s=";
          allowedIPs = [ "10.100.0.9/32" ];
        }
        { # ken
          publicKey = "6FHWDuKLW3QNVNTURIm6bJ1s0+FtzgEO9TtKuS0khhM=";
          allowedIPs = [ "10.100.0.10/32" ];
        }
        { # Jamie
          publicKey = "mF6eLG4VgwVV56PGn+Omg0mvN2UGB8b0i7rq8rJI+l0=";
          allowedIPs = [ "10.100.0.11/32" ];
        }
        { # saff
          publicKey = "3rxyEvAU3I/wdTRJR4qKAHmbmw5abnx1o49jei14FTI=";
          allowedIPs = [ "10.100.0.12/32" ];
        }
        { # Tech
          publicKey = "uD+yrVfZidjwiJjk6y5bHL7xlIozgsSKKGM3idu92BI=";
          allowedIPs = [ "10.100.0.13/32" ];
        }
        { # meow
          publicKey = "Jn3py2rxRuoluUl4eKxK+m+f21wMzQ4xI+NOMt7Oihc=";
          allowedIPs = [ "10.100.0.14/32" ];
        }
        { # fetti
          publicKey = "g92YcBJQK/MOWMbpF8wZV/G8EgKdcIdltfdE/26GgSA=";
          allowedIPs = [ "10.100.0.15/32" ];
        }
        { # baron
          publicKey = "4YQRCZwgdzpPk3Gia+3cl2GByHxjI1Vbup0orlgp8BI=";
          allowedIPs = [ "10.100.0.16/32" ];
        }
        { # blise
          publicKey = "wOOOAtQ5YX4surQGU1aU+JzSV1fI/qFqMLm731z8nTc=";
          allowedIPs = [ "10.100.0.17/32" ];
        }
        { # baba
          publicKey = "il12KBAwODC1TTZgT4JIL0f6AZcYWxylmuVlTlWd80s=";
          allowedIPs = [ "10.100.0.18/32" ];
        }
        { # Mari
          publicKey = "NfEjPn+ZYgB1vfNZ353AQOKPZLKUt4gPoNUSrywXjl0=";
          allowedIPs = [ "10.100.0.20/32" ];
        }
        { # WiTu
      	  publicKey = "k+PkzHREDszWnzvY79JcBL2XCkwtQ/XSunxNft7pjwY=";
          allowedIPs = ["10.100.0.19/32"];
        }
        { # Shiro
          publicKey = "I4US1u5iR5g8qzVvtVMvK65dgNsnnXbkAac3GBS1PWQ=";
          allowedIPs = ["10.100.0.21/32"];
        }
      ];
    };
  };
  
  # arion setup
  virtualisation.podman.enable = true;
  virtualisation.podman.dockerSocket.enable = true;
  virtualisation.podman.defaultNetwork.settings.dns_enabled = true;

  environment.systemPackages = [
    pkgs.git
    pkgs.bash
    pkgs.wget
    pkgs.curl
    pkgs.vim
 
    pkgs.arion
    # Do install the docker CLI to talk to podman.
    # Not needed when virtualisation.docker.enable = true;
    pkgs.docker-client
  ];

  # List services that you want to enable:

  networking.firewall.allowedTCPPorts = [ 80 443 22 25565 25566 25567];

  services.nginx = {
    enable = true;
    recommendedGzipSettings = true;
    recommendedOptimisation = true;
    recommendedProxySettings = true;
  };
  
  services.postgresql = {
    enable = true;
  };

  # Enable the OpenSSH daemon.
  services.openssh = {  
    enable = true;
    settings = {
      # Forbid root login through SSH.
      PermitRootLogin = "no";
      # key authentication
      PasswordAuthentication = false;
      KbdInteractiveAuthentication = false;
    };
  };

  # This option defines the first version of NixOS you have installed on this particular machine,
  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
  #
  # Most users should NEVER change this value after the initial install, for any reason,
  # even if you've upgraded your system to a new NixOS release.
  #
  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
  # so changing it will NOT upgrade your system.
  #
  # This value being lower than the current NixOS release does NOT mean your system is
  # out of date, out of support, or vulnerable.
  #
  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
  # and migrated your data accordingly.
  #
  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
  system.stateVersion = "23.11"; # Did you read the comment?
}